Low voltage & structured cabling

The part nobody sees, and everybody feels.

Cat6 data cabling, network racks, camera and access control runs, and audio wiring for homes, businesses and new construction across Conroe, Montgomery County and North Houston.

Licensed & insured | Texas Security License #B09391401

Structured cabling terminated to patch panels in a commercial network rack, Conroe TXProfessional security camera
5.0 on GoogleRated by local customers
No long-term contractsOn monitoring
Lifetime warrantyOn our workmanship
600+ local clientsHomes and businesses
Cat6 data cable run through open stud walls during a new construction pre-wire by New Generation Home Pro
Why it matters

One window, and it closes.

Cabling is the one thing on a building that is genuinely hard to change later. Once drywall is up and the ceiling grid is closed, a cable that was not run costs ten times as much to add. Almost every expensive low voltage problem we get called to fix started as a cable somebody decided to skip.

  • Cat6 drops for workstations, access points, cameras and TVs
  • Racks and patch panels, terminated, labeled and tested
  • PoE runs to camera positions and door hardware
  • Speaker wire and conduit paths for in-wall and in-ceiling audio
  • Spare sleeves so the next addition does not mean opening walls

Building or remodeling?

The right time to involve us is at rough-in, before insulation and drywall. Send us the plans and we will mark what needs to be run and when we need to be on site.

Why NGHP

Done once, properly.

The typical job

  • Only the drops someone remembered that day
  • Cable bundled and zip-tied to a stud
  • Nothing labeled, nothing documented
  • No pathway left for the next upgrade

The NGHP way

  • Cat6 as standard, because the labor cost is the same
  • A proper rack, terminated and patched
  • Every run labeled at both ends and tested
  • Conduit and spare sleeves where it is practical
Subscribers only

Get our specials first.

Join our email list to see them

Our best deals on cameras, alarms, and upgrades go to our email subscribers first. Sign up free and you'll be the first to know when our next special goes out.

NGHP subscriber-only deals

Simple from the first call.

Plans review

Send us the drawings. We mark proposed locations and quote before anything is committed.

Walkthrough at framing

We walk the framed structure and confirm positions in the real space, which is when most people change their mind about a TV wall.

Rough-in and trim out

We pull, label and test the runs, then come back after paint to install and commission the devices.

5.0
★★★★★
Read our Google reviews
I chose New Generation Home Pro because of the quality of their proposal over others. The installation was scheduled in a timely fashion and completed in one day. They were very receptive to my preferences during the install. I will be using them again in the future.Frank H., Google review
Our Lake Conroe office

Right here in Conroe.

Our office is at 3421 W Davis St, Suite 160, Conroe, TX 77304. We work with builders, general contractors, electricians and property owners across Montgomery County and North Houston.

Lake ConroeMontgomeryWillisConroeWaldenApril SoundBentwater

Call 936-205-2735 or send us the plans.

Common questions

Low voltage cabling questions.

Who is a low voltage contractor in Conroe, TX?

New Generation Home Pro provides low voltage and structured cabling services throughout Conroe and Montgomery County. We are licensed and insured, TX LIC #B09391401, and based at 3421 W Davis St in Conroe.

What counts as low voltage work?

Low voltage covers the wiring that is not household electrical power: data and network cabling, security camera and alarm wiring, access control, speaker wire, coax and intercom. It is a separate trade from electrical and a separate license.

When should cabling be run on a new build?

At rough-in, after framing and before insulation and drywall. That is the only window where a cable run is cheap. Once the walls are closed, adding a drop usually means cutting, fishing and patching.

Should I use Cat6 or Cat5e?

We run Cat6 as standard. The cost difference on the cable itself is small compared to the labor of pulling it, and the labor is identical either way. Given the cable may be in the wall for twenty years, it is not worth saving a few dollars on.

Do you work with builders and general contractors?

Yes. We coordinate with builders, GCs and electricians on schedule, and we would rather be on the plans early than squeezed in the week before drywall.

Can you run cable in a building that is already finished?

Usually, yes. Attic and crawl space access, interior walls and ceiling grid all give us routes. It takes longer than rough-in work and we will tell you honestly if a particular run is not practical.

Do you label and test the cable you install?

Yes. Every run is labeled at both ends and tested before we close up, and you get documentation of what goes where.

What does structured cabling cost?

It is quoted per drop and depends on the building, the run lengths and the access. Estimates are free and we price after reviewing the plans or walking the building.

Get your free estimate.

Tell us about your home or business and we'll reach out to schedule a free on-site visit. Prefer to talk now?

281-810-6799

Planning a bigger project?

Tell us about your property and the products you want, and we'll come prepared.Tell us the details